Capacity Max Upgrade
What to know about the Capacity Max upgrade from 2.10 to M2020.1
Upgrading from Capacity Max 2.10 to M2020.1 involves several important steps and considerations. Here are the key points to keep in mind: Follow the Upgrade Manual: It’s crucial to follow the upgrade manual provided by Motorola. This document will ...
What parts / spares / tools do I need to replace the battery contacts on the DP4000 series radios?
To carry out the repair of the battery contacts connector on the DP4000 series radios, the person doing the repair on these radios will need the following hardware: T3 and T6 Torx screwdrivers (Not available through Motorola) 1 x PMLN6208 Chassis and ...
RM device monitor, job processor services do not start
if your RM services do not start, check event manager for more details. In case that you find error related to .net 4.0 framework,. example: Log Name: Application Source: Motorola RM Device Programmer Date: 31/01/2018 12:06:57 Event ID: 0 Task ...
RAS KEY ERROR
With all new firmware versions of Mototrbo radios, Restricted Access to System (RAS) is enabled by default. To change it, use CPS to navigate to "Security" where you can delete the RAS key entry, or type in a RAS key if you wish to use RAS. Please ...
On the Radios with MPT GOB, There is a problem to go back from the MPT1327 Zone to the Conventional simplex zone
After creating the MPT channels and a button as zone selection. The most important point is that in CPS/Channels, you need to create your MPT channels on top of Channel pool and conventional zone below the Channel Pool and everything should work ...
New version of CPS 2.0 - what you need to know
In mid-2019 Motorola released an all-new version of Mototrbo CPS which has been named CPS 2.0 and it has completely replaced the legacy CPS which ended with version CPS 16, Build 828. Please see the description below, regarding the differences ...
My screen keeps changing resolution when Using Mototrbo CPS on windows 10
This issue is quite common with the MOTOTRBO CPS software on Windows 10. Fortunately, there’s a simple fix: Right-click on the CPS Desktop Shortcut. Select Properties. Go to the Compatibility tab. Check the box for Override high DPI scaling behavior. ...
MotoTrbo Provisioning of R7 and ION
The MOTOTRBO ION and R7 both require a one-time online activation (regionalisation) before use or programming using CPS or RM. To support this, these radios come preconfigured with a default SSID and passkey, so all one needs to do; is to setup an ...
IPSC Slot selector grayed out for repeaters using CPS version 16 Build 823
When reading an SLR repeater with CPS version 16, Build 823, the IP Site Connect slot selection dialog box is grayed out. The problem and resolution is outlined in the following Motorola bulletin: ...
RM Quick Startup Guide
How to get started to use RM as programming of repeaters, both peers and master on a IPSC or Capacity plus systems. 1. Add IP system settings Open action(Green wheel)>Manage>IP system settings Add new as Link Establishment Repeater Add system Alias ...
How to find out if DR3000 is 8mb or 32mb
Initially, the DR3000 was produced with 8Mb memory but with the rapid advance of features, this was later changed to 32Mb. This means that the 8Mb models do not support IP Remote Programming or Linked Capacity Plus To determine if your Motorola ...
How to connect Peltor WS Alert XPI to DP3441 via bluetooth
Step1: Upgrade DP3441 to R2.9 or above so that the radio will have "Bluetooth Audio and Radio Programming" license. Step2: configure side button for Bluetooth Connect Bluetooth Disconnect Bluetooth Discoverable On/Off Step3: Turn on Peltor Headset ...
How to add logo on DP and DM radios
Open paint, select new. Resize the new image to size that fits your radio: 160 pixel (width) * 72 pixel (height) and 256 color for Mobile 132 pixel (width) * 90 pixel (height) and 256 color for Portable Full Keypad model 132 pixel (width) * 72 pixel ...
How much current does the SLR5500 draw?
A query was raised by a customer who wanted to know how much power they could save if they ran their repeater at 25W instead of 50W. They were running the repeater entirely off solar power and were concerned about consumption. We set up an SLR5500 ...
Motorola MotoTRBO Customer Programming Software (CPS) Error Number#: 1687
Error Message: Unable to detect applicable device. Check to see if compatible programming cable is used. Troubleshooting Instructions: There are several things that can cause this issue. Here are some things to verify. 1. Verify that the MOTOTRBO ...
DM 4xxx to GM back to back bridge pinout
Note: this design, due to high amplitude signal from DM to GM and consequent noise on analog side, is not recommended. Substitute design would be using the DM (programmed as analog) to DM (digital) or using a RICK (repeater interface communication ...
DM 4XXX to DM4XXX BACK TO BACK BRIDGE PINOUT
In this design one of the DM radio is configured as analog in the codeplug. DM4xxx---------------------------DM4xxx PIN17 Ext PTT mic- - - - - - - PIN19 PIN19 CSQ detect- - - - - - - PIN17 PIN14 Rx Audio- - - - - - - - - PIN11 PIN12 Audio ground- - - ...
Activate/Recover device license
Activate/Recover device license In case that you have a radio missing purchased license you can recover those using the latest CPS that supports your Radio. The steps are as following Recover device license Activate device license This process will ...
"Service Code Error 0802" or "Error 01/42"
If you get an error code 0802 when trying to clone radios with the latest firmware version, please see the attached technical notice from Motorola.
How to register and activate licenses in CPS 2.0
First of all an account for authentication purposes are needed, please see below article: https://support.danimex.com/portal/en/kb/articles/new-authentication-protocols-from-motorola To register features from a license, please follow below guide: To ...
MotoTrbo Provisioning/Regionalization of R7 and ION
The MOTOTRBO ION and R7 both require a one-time online activation (regionalisation) before use or programming using CPS or RM. To support this, these radios come preconfigured with a default SSID and passkey, so all one needs to do; is to setup an ...
New authentication protocols from Motorola
In August 2023, Motorola introduced a new authorisation policy for activating and installing features in the DMR and TETRA series of radios. In order to activate a license, for example, the technician will need to first access the Motorola server, ...
How does the DP4000 series squelch system work, and why is it so good?
Description of the squelch system differences between traditional analog radios and Motorola DP4000 series radios Squelch on traditional analog radios On most analog radios the squelch system is quite an unsophisticated “noise gate” that will only ...
Compare US to EMEA models
List of MOTOTRBO Models - MOTOTRBO And one more link: https://www.motorolasolutions.com/content/dam/msi/docs/partners/developer-program/adk_overview.pdf#page=30
Activate/Recover device license
In case that you have a radio missing purchased license you can recover those using the latest CPS that supports your Radio. The steps are as following Recover device license Activate device license This process will restart the radio and now you can ...